Browse all practice questions for the Hazardous Materials Technician 3rd Edition Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Hazardous Materials Technician 3rd Edition Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What provides the basis for the hazard and risk assessment that determines the risk-based response?
  • The first priority, when considering offering to population is ___________.
  • Hazard communication requires which type of inventory list under 29 CFR 1910.120?
  • Termination is the incident phase characterized by near completion of response and start of recovery?
  • The measurement of oxygen concentration at hazmat scenes serves what primary purpose?
  • PPE records should include all testing, inspections, and _________.
  • Which practice ensures evidentiary integrity by documenting everyone who handles the item?
  • If an entry team member is unable to safely, exit the hot zone the entry team leader should declare a ____________.
  • Which decontamination method results in destruction of all microbial life?
  • This over the road container has pressure under 40 psi, and typically carries about 7,000 gallons. Which DOT specification does it represent?
  • Contaminated, ______________ people are those who are able to understand directions talk and walk unassisted.
  • Flammable liquids produce what, most of which are heavier than air?
  • Venting a product would be used on ___________ gases.
  • Venting a product would be used on which type of gases?
  • __________ is when a product goes from a solid to a gas without going through the liquid phase.
  • A gathering of information from all responders involved in an incident is called what?
  • __________ records are an incident chronological record, written documentation, photographs video and audio tapes, and computer generated reports.
  • Which phrase best communicates that a container shows no damage and no product release?
  • MC306 and DOT406 containers carry what?
  • Which factor makes certain substances difficult to confine and contain and thus require special handling?
  • Personnel who enter the hot zone, or who are within the decontamination line are documented via:
  • What type of documentation may be required only at incidents involving injuries or death?
  • MC 331 containers carry products that have _________.
  • Which classification of PPE is designed to protect responders against vapor, liquid droplets, and aerosols where potential skin contact is expected to be at a moderate to high level?
  • Which SMART criterion ensures that a goal has a deadline?
  • The three main types of Decon that a technician may have to perform are emergency, mass, and ___________.
  • Hazardous materials technicians would most likely operate in which atmosphere for rescue or recovery?
  • Where is the first place you should look for a cargo tank emergency shut off?
  • The NIOSH Pocket Guide uses guidelines from NIOSH and _______.
  • Which state of matter is usually the least mobile?
  • An incident action plan (IAP) helps to maintain ___________ of effort.
  • What is the term for the documentation that records who has physical control of an item of evidence?
  • All chemical reactions, absorb or release __________.
  • What is the first priority when implementing strategies and tactics?
  • When should offensive responders take action?
  • When formulating a plan of action for rescue or recovery, what should the hazmat team provide?
  • Which type of response process should be used to determine a team's capability for safety in a rescue or recovery operation?
  • A calibration check is performed to confirm instrument readings are accurate.
  • Which statement best describes product control?
  • Which decon category involves thorough and advanced procedures for complex contaminants?
  • In the Hazmat Branch of the Incident Command System, the reporting structure follows which style of command?
  • Which designation indicates the highest level of body armor protection?
  • Which ensemble is designed to protect emergency responders from biological aerosols and radiological contaminated particles, but does not protect against chemical warfare agents or toxic industrial chemicals?
  • An Overpack drum is commonly constructed from which materials?
  • One atmosphere is equal to 101.325 kilopascals.
  • The chemical reaction initiated by a threshold cannot be stopped until completion when the material reaches which point?
  • The process by which protective garments lose their protective properties due to exposure to chemical substances, or heat or sunlight is called?
  • What do you call a written legal document that includes the name of each person who maintains physical control over an item of evidence?
  • Confusion, loss of consciousness, convulsions, lack of sweating and abnormally high body temps are symptoms of ___________.
  • Another name for the hot zone is the ______.
  • What is the term for tasks addressing damaged, or potentially damaged containers that have released or are threatening to release their contents?
  • In the US shipping papers are required by what code of federal regulation?
  • APIE-T emphasizes applying a continuous, risk-based approach throughout incident response. Which option best reflects this emphasis?
  • What is another name for a blister agent?
  • Before entering the hazardous area, PPE should be checked by the _________.
  • One reason that explosives are so dangerous is that they contain both a ____________ and a ____________ component.
  • Time, distance, and shielding are used to manage exposure hazards from which source?
  • Because they travel so easily, which substances are difficult, if not impossible to confine and contain?
  • Notifications and reporting for releases are based on which two factors?
  • Noble gases are typically unreactive because they have a full valence shell of electrons.
  • Which statement best describes Class 4 ensemble's protective scope?
  • Noncontact thermal devices measure which atmospheric property?
  • What should technicians address before beginning an offloading or transfer operation involving solids, liquids or gases?
  • The types of reports to be completed after a hazmat incident will vary from organization to organization but some are mandatory under state or federal law.
  • The purpose of an incident debriefing is to gather needed information from all involved personnel before their demobilization. Which option best describes this purpose?
  • Which term describes a disease that can spread rapidly and easily?
  • Examples of flammable and combustible liquids frequently encountered at hazmat incidents are ______ and ______ fuel.
  • The difference between public safety sampling and evidence collection is often based on __________.
  • Liquified compressed Gas (Round Heads) have a pressure range of
  • What term defines the limit of exposure duration to prevent injury?
  • Materials that will not mix or dissolve into each other are called what?
  • Reactivity describes a material's propensity to release energy or undergo what?
  • Chemicals that remain in the environment for a long time are said to be __________.
  • To determine the condition of a container, technicians must know what the container was like in its __________.
  • It is possible to alter a chemical reaction by changing the _________ of the chemicals involved.
  • What type of documents may assist agencies responding to laboratories in determining what chemicals are present?
  • What type of transportation container will not display outer markings or placards indicating a type of hazardous cargo inside?
  • There must be at least __________ fully equipped and trained responders at the scene before an entry can be made
  • When matter changes state, which property remains unchanged?
  • What term describes the rate at which a liquid becomes a gas?
  • DOT defines cryogenic liquids as starting at which temperature in Fahrenheit?
  • When choosing a decontamination site, the wind direction relative to the hot zone is described by which term?
  • In rail hazmat transport, what term describes the train papers used to document the shipment?
  • Function check (bump tests) verifies the instrument calibration by exposing it to known concentrations of __________.
  • A chemical's ____________ is the lowest concentration at which most people can smell it.
  • Which factor determines when notifications must be made for a release?
  • The purpose of isolation at a hazmat incident is to _________ people and animals from the hazard.
  • According to the SMART model strategies should be Specific, Measurable, Action oriented, Realistic, and ___________.
  • When using SCBA, at hazardous materials incident, is important to include a _____________ into the estimated working time that is equal to approximately _____________ of the air cylinders working time.
  • Which statement best describes non-intervention?
  • Covalent bonds are characterized by:
  • When a chemical bond is broken, _________ is released.
  • Which of the following is a flammable liquid commonly encountered at hazmat incidents?
  • What technique allows personnel to offload a chemical from a damaged or overloaded container into a receiving container?
  • What provides the hazmat technician with an organized approach to understanding the hazardous characteristics of a product?
  • If a product has a vapor pressure of 8.6 ATM, it has a _________ boiling point.
  • Temperature actually measures average ___________ of molecules in a substance.
  • If released in a confined space, a liquefied gas may _____________.
  • What is the term for compounds that lack carbon?
  • Majority of problems with cargo tanks are due to which components?
  • If a chemical is poisonous, what does this indicate?
  • Which type of material tends to stay put even when it escapes its container?
  • Toxicity of a product can be minimized to responders by wearing which combination of protection?
  • The planned systematic removal of contaminants from personnel, and/or equipment is known as _____________ decontamination
  • During initial isolation, what distance is recommended for a gas hazard?
  • One atmosphere at sea level is equivalent to 760 millimeters of mercury.
  • What is the air transport document called?
  • Which container is typically a large, rigid or semi-rigid vessel used to transport liquids and designed for limited reuse?
  • The three components that form the basis of risk-based response are facts, science, and circumstances. Which option identifies what is NOT included?
  • Which of the following is NOT one of the three primary states of matter?
  • Which role is responsible for supervising entry teams and overseeing their safety?
  • The air bill listing items in air freight is typically maintained by whom?
  • What is another term for specific gravity?
  • A hazmat incident involving an unconfined material is likely to follow which sequence?
  • Which of the following is not listed as one of the significant families?
  • In offensive response planning, which zone is designated as the hot zone?
  • Substances that lose electrons are called ___________ agents.
  • Which breathing protection is explicitly named as part of the protective equipment to protect responders?
  • The objective of __________ monitoring is to determine the presence and concentration of product in a specific area.
  • Internal communication procedures are often tailored to what?
  • During hazmat incident operations, when are binoculars or unmanned devices most useful?
  • During initial isolation, what distance is recommended for a solid hazard?
  • Which term describes the system that standardizes hazard classifications and communications on a global level?
  • Elements in the same group have similar chemical properties because they share the same number of what in their valence shell?
  • Which container is a limited-use, large, rigid or semi-rigid container, meant for pouring liquids?
  • How are the contents of fixed facility containers identified if they are only marked by a number?
  • Direct reading instruments are valued for providing immediate readings of what?
  • What is the pressure increase per 1 degree temperature rise according to the rule of thumb?
  • The first Pl., Oklahoma responders should contact for help on a hazmat scene is ______.
  • Which hazard category requires hazmat technicians to use oxygen sensors, LEL meters, and PIDs?
  • What is an appropriate way to report that a container is undamaged and there has been no release of the product?
  • Which unit is used internationally for pressure measurement?
  • ____________ are substances that are applied to nonliving objects to kill, or eliminate pathogens.
  • MC306 and DOT406 containers are equipped with which discharge feature?
  • A fire or explosion is an example of a fast ________________ reaction.
  • Which type of materials generally have a lustrous appearance can be shaped to form sheets or wires, and are good conductors of heat?
  • Which set correctly lists the three control options at hazmat incidents?
  • Biological Immunoassay indicators and protein tests are used to detect what type of hazards?
  • Unanticipated changes in respirations, level of consciousness, or cardiac functions after exposure are what type of symptoms?
  • Halogenated hydrocarbons at hazmat incidents are known as which type of hazard?
  • In ICS structure the position of liaison is part of the ______________.
  • The state of matter is largely dependent on the ___________ of a substance.
  • Which of the following is NOT a valid strategic mode of operation?
  • Which of the following is a characteristic of a covalent bond?
  • What does CPC stand for in hazmat PPE?
  • For moving an adult safely, how many rescuers are typically recommended at minimum?
  • Which type of release geometry generally results from a liquid release of energy, such as detonation or violent rupture?
  • Alpha and beta radiation hazards are primarily what types of hazards?
  • Risk a lot to save a viable life; Risk a little to save property; Risk _________ to save nothing.
  • Which level of body armor supplies the greatest protection?
  • What are the three control options at hazmat incidents?
  • A product with a low boiling point is associated with which vapor characteristic?
  • What is the primary purpose of pipeline markings at crossings?
  • Which term describes a substance that readily absorbs water from its surroundings?
  • Detection monitoring of suspected hazards will often be an __________.
  • How long is the thermal protection for direct flame contact fire (torch fires)?
  • OSHA 1910.120 access to employee exposure in medical records requires that all exposure reports be maintained for the employees length of employment plus an additional ________ year.
  • MPM3 (milligrams per meter) = Contact Hazard.
  • An emergency response agency that routinely uses CPC must have an established CPC program and respiratory protection management program. What does CPC stand for in this context?
  • What is the first priority at a hazmat incident?
  • Contacts (impimpingements) during exposure are associated with which general category?
  • NFPA _______ standard covers SCB A design and testing.
  • After filing hazmat incident records, how long must they be secured and maintained beyond an employee's tenure?
  • The use of solutions, solvents, and other surfactants that help reduce the adhesion between the contaminant and the material being cleaned as part of the __________ decontamination method.
  • MC 331 containers carry products that have high vapor pressures. These products belong to which hazard class?
  • A material transported in amber bottles is likely to be what?
  • Acute exposure is best described as exposure lasting a what duration?
  • What group of elements is often transported as a cryogenic liquid and if released, can dissipate oxygen, potentially causing asphyxiation?
  • The method used to determine how to assess decontamination effectiveness is generally determined by the ______ involved.
  • What effect can oxidizers have on fire?
  • Which is a characteristic of a covalent bond?
  • DOT regulations require the display of proper shipping name for which product categories?
  • Eliminating potential ignition sources and using intrinsically safe tools and equipment are actions taken to what?
  • Substances that ignite when exposed to air at normal temperatures are ___________.
  • A unique consideration in controlling ____ substances is that the temperature of the released material may alter the properties of the surfaces or tools being used.
  • Hazmat technicians often use electronic resources to perform their research functions because they are ______________.
  • Which term best describes a reaction where the combined effect of two or more substances exceeds the sum of their separate effects?
  • Which term describes carbon-containing compounds typically studied in organic chemistry?
  • Which records is the hazmat safety officer not required to keep?
  • Which factor is most important when determining the PPE to use at an incident?
  • When researching a product's flame potential, which property should you identify?
  • Which term describes the organized overview used to understand the hazardous characteristics of a product?
  • Collision, impact, and internal over pressure are common causes of which type of stress?
  • The process of soaking up a chemical spill is known as ___________.
  • The ________ is responsible for all responders moving between control lines.
  • Low environmental temperatures or cryogenic materials are considered a type of hazard due to their ______ properties.
  • In ICS, the Hazmat Branch reporting structure is designed to maintain authority through which principle?
  • Which function is primarily responsible for actions to stop a release and limit consequences?
  • Activity logs should be a __________ list that includes all events that occurred during the incident.
  • In ICS structure, the Liaison position is associated with which group according to the source material?
  • Field screening of a sample is used to determine if the sample requires laboratory analysis.
  • At an incident, a Hazmat Technician is expected to take a more what role than an operations level responder?
  • Technicians should perform post Decon checks as individuals exit the ______.
  • ________ papers must include proper chemical name, UN ID#, package type, and 24 Hr Emergency contact number.
  • Which of the following best defines heat stroke?
  • Which group of elements is typically unreactive due to a full valence shell?
  • What are the two elements of chemical research?
  • What three components form the basis of a risk-based response?
  • Department of Transportation regulations are under title?
  • Before samples can be sent to a laboratory they must be __________.
  • Which of the following is NOT one of the three main decontamination types?
  • Which type of monitoring and detection instruments are the easiest to use?
  • Bags, drums and cylinders are types of which packaging?
  • Why does fire impinging on the vapor space of a container stress the container more? The vapors _________ but cannot escape their container.
  • If vapors in a closed container are heated, what happens to the vapor volume?
  • Internal communication procedures are often what type of specific?
  • The site safety plan is a part of the IAP that is specific to the ________ of the incident.
  • Which statement describes the environmental persistence of chemicals?
  • All responders exposed to potentially hazardous materials are required to fill out which type of records?
  • Who is primarily responsible for planning for and overseeing demobilization at a hazmat incident?
  • Which container is typically designed for highway transport of hazardous liquids?
  • What is the term for releasing resources no longer needed at an incident?
  • Which term describes the typical progression of a hazmat incident involving an unconfined material?
  • Low environmental temperatures or cryogenic materials are considered a type of ____________ hazard.
  • Which term describes the density comparison to water?
  • Reusable CPC after use and decontamination should be stored in an area out of what?
  • What can be used to initiate polymerization?
  • Life-saving operations should take precedence over which type of operations?
  • If the gas you are measuring is between its lower explosive limit (LEL) and upper explosive limit (UEL), the ambient atmosphere is readily what?
  • Which property defines a liquid's flammability and helps predict ignition risk?
  • A responsibility of a technical specialist at a hazmat incident is to properly do what?
  • One advantage of using a response model is that it can simplify ____________.
  • Protective garments physical characteristics are altered because it has come in contact with a chemical substance, or has been exposed to heat or sunlight. The process is known as ___________.
  • Explosives are classified as low or high explosives based on their __________.
  • During the post-incident analysis, hazmat technicians may be assigned to gather information or complete reports. Which phase is this?
  • Best place for information about organophosphates?
  • Which instrument detects concentrations of flammable or combustible gases and vapors in the air?
  • APIE-T is described as what kind of response process?
  • What defines the maximum length of time an individual can be exposed to a chemical (usually airborne) before injury illness or death occurs?
  • What is it called when atoms join together and share electrons?
  • What criteria may the AHJ prioritize for entry into the Decon corridor?
  • The state of matter is largely dependent on the ______ of materials.
  • The acronym CPC stands for
  • Oxygen concentration should be measured for respiratory safety and to assess an increased risk of what?
  • If a communication device that is integrated into PPE stops functioning attempt to communicate with team members using backup communication method such as _____________.
  • Excess atomic energy is released as what?
  • Which term describes placing a damaged container into an undamaged containment device?
  • The Globally Harmonized System specifies the minimum information that must be provided on which document?
  • Which statement best describes the relationship between dose and harm in toxicology?
  • Which organization is typically involved in local hazmat planning and response coordination?
  • Etiological hazards are associated with hazards arising from what source?
  • Which statement about intermodal containers is true?
  • Which infrastructure is often buried, making its location difficult to identify?
  • M9 paper is used to detect which agents?
  • What should responders do when a material has not been identified?
  • If there is a threat of catastrophic failure, BLEVE or other explosion, ________ may be the safest option
  • DOT defines cryogenic liquids at temperatures starting at __________.
  • Responses to illicit laboratories incidents are often dispatched as other emergencies. Which category describes this scenario?
  • Triple bonds are found in which hydrocarbon group?
  • If a product has a low boiling point, what can be inferred about its vapor pressure?
  • Which statement best describes the duration of protection for direct flame contact fire?
  • What term refers to a formal means of evaluating the incident, not an opportunity to assign blame?
  • Which term describes the phase transition from solid to gas without passing through liquid?
  • A contagious disease can spread rapidly and easily.
  • Decon corridors should separate Humans and ____________.
  • Which term describes a formal review after an incident to evaluate response and identify improvements?
  • What procedure should be performed before donning PPE at a hazmat incident?
  • Which factor determines the state of matter primarily?
  • Ionic bonds are characterized by:
  • In cold-weather decontamination, what type of water is recommended for decon showers?
  • In a __________ process response, actions may change if circumstances change.
  • ___________ markings are required under roads, waterways, and railroad crossings.
  • Which category includes lithium, sodium, and potassium?
  • Which document category helps responders determine the chemicals present at a lab incident?
  • What is the last step of the cyclical problem-solving process? (APIE)
  • What term describes the organized removal of contaminants from personnel and/or equipment?
  • What do you call a device designed to expose people to radiation or disperse radiological materials?
  • If released in a confined space, a liquefied gas may expand to fill the space.
  • Which PPE is designed to allow responders to operate near nearly total flame environments?
  • To reduce contamination during a hazmat incident, what should you avoid doing while wearing CPC?
  • What type of packaging is used for high activity, radioactive materials, transported by aircraft?
  • NFPA 472 training for hazmat safety officers is at which level?
  • A unique consideration in controlling cryogenic substances is that the temperature of the released material may alter the properties of the contact materials or tools being used.
  • Which concept naming the nature of matter and how atoms form compounds is described by which theory?
  • Which term best describes the action of gathering information from all involved personnel before they demobilize?
  • A PPE suit that allows responders to work close to total flame environments is called what?
  • Which resource should an emergency responder contact first for outside assistance at an incident?
  • What does PID stand for in gas detection?
  • The process of rapidly reducing or removing contaminants from multiple persons, and potentially life-threatening situation, is known as __________ decontamination.
  • If a hazardous material touches your skin and causes a chemical injury at the site of contact, this is considered a _________ toxic effect.
  • Which type of respiratory protection is considered inadequate for use at hazmat/WMD incidents?
  • DOT 110 and DOT 106 refer to which containers?
  • During decontamination of evidence, which part of the item should be decontaminated?
  • A 407 container placard guide page is 119. What does this mean? The product is a _________.
  • Chemical/biological __________ is a decontamination method that changes the composition of a material.
  • Exposed responders are required to complete which records?
  • Hazmat technicians who locate criminal evidence at an incident should work with which authority to preserve it?
  • A _____________ reaction is an interaction between two or more compounds that produce an effect that is different from the original starting materials in the end product is greater as a hole in the individual compounds.
  • If solubility is below 10%, what is recommended?
  • In aqueous solutions, the pH level is determined primarily by the concentration of which species?
  • The primary objective of isolation at a hazmat incident is to separate whom from the hazard?
  • Hazmat Technician should be able to interpret data sources and information regarding not only the product involved but also selection of ______________.
  • On a rail car, the reporting marks and numbers are located on the ________, ________, and ________ of the car.
  • Which locations on a rail car display the reporting marks and numbers?
  • PPM = Inhalation Hazard.
  • To determine the container's current condition, responders compare it to which reference?
  • NFPA 472 requires hazmat safety officers be trained to which level?
  • When materials spill, which form is most likely to flow as a liquid?
  • The most important question for PPE selection: Has the hazardous chemical product been _______________?
  • Who may train hazardous materials technicians to meet local requirements?
  • Which mode involves aggressive actions to defeat the hazard?
  • Hydrocarbons usually do not mix in water because they are __________.
  • Post-decon checks are conducted to verify that contaminants have been removed from personnel before they exit the decontamination area.
  • What is the basic building block of matter and everything around us?
  • The starting pressure for pressure rail cars is given in what unit?
  • Which protective level corresponds to Level B Type 1?
  • Upon arriving at a hazmat incident, technicians should gather information for their what of the problem?
  • The speed of which a solid changes from a solid to a gas is called ______________.
  • What are the two types of intermediate bulk containers (IBCs)?
  • For torch-fire protection, the specified duration is 30 minutes. Which option correctly reflects this duration?
  • Which form of chemical degradation is used in association with acids and bases?
  • Which statement is true regarding the relationship between temperature and kinetic energy?
  • Which statement correctly describes carbon-containing substances?
  • Which term describes atoms sharing electrons to achieve stability?
  • What happens to vapor pressure as temperature increases?
  • If we reduce the temperature of a product the vapor pressure goes ______.
  • Which approach uses liquid reactions and indicators to identify hazards at hazmat scenes?
  • Which term describes how quickly a liquid turns into vapor when conditions allow?
  • A large exposure over a short period of time is a(n) ________ exposure.
  • What type of container can be transferred between modes of transportation without being offloaded?
  • Which planning approach helps determine what hazardous materials are likely to be present in your jurisdiction?
  • What water temperature is recommended for decon showers in cold weather?
  • In the United States, the unit for measuring pressure is __________.
  • ___________ is the response mode that responders take no direct action on the actual problem.
  • Which term describes the required depth of knowledge for Hazmat technicians in hazard and risk assessment?
  • Which option is not among the four significant families on the periodic table?
  • During initial isolation, what distance is recommended for a liquid hazard?
  • The recommended safety buffer for SCBA air time is approximately what fraction?
  • Which ICS section is tasked with developing and implementing the demobilization plan?
  • Technicians should immediately perform a visual inspection of PPE to verify that all components are free of ___________ or ___________ before entering a hazardous atmosphere
  • At what point during a hazmat incident would you be most likely to use binoculars, robots or drones?
  • Who should wear respiratory protection at an incident?
  • One atmosphere is equal to 101.325 pascals.
  • Substances that lose electrons are called what type of agents?
  • Materials that absorb water are described as what?
  • Geiger-Muller detectors detect which types of radiation?
  • When the temperature of a product is increased, the material will expand and the density will ____________.
  • A molecule is made up of two or more ________.
  • When selecting a decontamination site, the site should be _________ of the HotZone.
  • Ambulatory individuals are able to do which of the following?
  • What is the most common type of railway tank car in North America?
  • Which process should be used to determine a team's capability to safely perform a rescue or recovery operation?
  • Toxic materials can also be described as ____________.
  • For immiscible liquids, what is true about their mixing?
  • A molecule is made up of two or more what?
  • The atomic number of an element corresponds to the number of what in its nucleus?
  • Which IAP component is tailored to the site of the incident?
  • What term describes how much of each component is present in a mixture?
  • Isolation Zones are easier to ________ than ________.
  • Handtools tend to be the default choice at hazmat incidents, particularly in potentially flammable atmospheres because handtools are likely to be what?
  • What is the last phase of the APIE-T process?
  • Who must fill out exposure reports after an exposure?
  • Explosives are classified as high or low explosives based on their detonation velocity.
  • According to the material, which statement is identified as a characteristic of covalent bonds?
  • Lithium, sodium, and potassium are examples of _________.
  • Which of the following is NOT listed as one of the significant families on the periodic table?
  • Which type of hydrocarbons have a triple bond?
  • When handling evidence, which portion should be decontaminated to minimize contamination risk?
  • If hazmat technicians find criminal evidence at a scene, they should coordinate with law enforcement to preserve it. To which entity should they report this requirement?
  • The rate at which sublimation occurs is referred to as what?
  • Inorganic peroxides may __________ without air.
  • According to the General Emergency Behavioral Model (GEMBO), what is the first step in the sequence?
  • The Department of Transportation DOT refers to which containers as multiunit take car tanks (DOT 110 and DOT 106)?
  • Hazardous materials technicians are typically deployed in which atmosphere for rescue or recovery operations?
  • It is sometimes difficult to identify the location of a pipeline because they are often _________.
  • Regent tests, chemical test strips, and pH paper are forms of what?
  • DOT 111 is a _____________ Tank.
  • Which is the most common type of SCBA for use in an IDLH atmosphere?
  • Oxidation cannot occur without simultaneous __________.
  • Which decon type is designed to rapidly reduce hazards during a life-threatening incident with mass exposure?
  • Which activity constitutes the post-incident review of incident details and response to identify improvements?
  • Solutions, slurries, and alloys are all examples of what?
  • Unanticipated changes in respirations, level of consciousness, or cardiac functions after exposure are what type of symptoms?
  • Which phase of an incident is where response activities are near completion and recovery starts.
  • Who has the air bill listing items in air freight?
  • LEL and UEL refer to which property of gases?
  • A general knowledge of containers helps Hazmat technicians to do what?
  • Which class of hydrocarbons contains a triple bond?
  • A cargo tank truck is a ______ cargo container.
  • What is the typical material pairing for an Overpack drum used in hazmat packaging?
  • To press a gas into a liquid we must use temperature and __________.
  • What is a major advantage of M8 and M9 papers?
  • In what types of chemical bonds are electrons SHARED between elements?
  • Which concept addresses the nature of matter, defines the fundamental elements, and explains how atoms form compounds and take part in chemical reactions?
  • What term describes the quantitative relationship between dose and harmful biological effects?
  • In the United States, the notification process for state and federal responders is in which framework?
  • __________ reports maybe shared with other organizations, so that lessons learned from the incident may benefit others.
  • What are the two elements of chemical research?
  • The basic building block of matter and everything around us is called what?
  • Which type of decontamination is urgent and expedient, and applies to any person who has had direct exposure to contaminants.
  • Under OSHA exposure record retention, how many years, after length of employment, must records be kept?
  • Another name for inhibitor is __________.
  • What is the first thing a hazmat technician should do at an incident?
  • Which decon category is used when time to decontaminate is critical and individuals require immediate relief?
  • Technicians must undergo medical monitoring and operations, because working in full body protective clothing put them at higher risk of developing ____________, which is a potentially deadly condition.
  • Which of the following is not listed as a significant family?
  • A garment designed to cover the wearer completely with an SCBA on the inside and provides minimum splash protection corresponds to which protective level?
  • If there is more than one way for an atom to fill its valence shell, the atom will typically take the option requiring the _____________.
  • Which of the following is NOT a primary component used to terminate a hazmat incident?
  • Which decon category is designed to process large numbers of people rapidly?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy